Setting Up the 4-20 mA OUTPUT
This section provides information on setting up the outcard for RS-232 Communications.
Press
Display
D
MENU (Displays 1 second).
DEV TYPv.
D
LOCKOUTv.
D
OUTCARDv.
D
ALG OUTv.
ENT
SET LOW (Displays 1 second).
######## (Current value blinks).
CLR
Enter new Rate Low Limit from the worksheet for 4 mA output.
ENT
SET HIGH (Displays 1 second).
######## (Current value blinks).
CLR
Enter new Rate High Limit from the worksheet for 20 mA output.
ENT
SmartTrol returns to normal operating mode.
Table 12 – Setting Up the 4-20 mA OUTPUT
Setting Up the Relay Operation
This section provides information on setting up the relay operation.
Press
Display
D
MENU (displays 1 second).
DEV TYPv.
D
LOCKOUTv.
D
OUTCARDv
D
ALG OUTv
D
RELAYv
ENT
SCV MINV.
Press B for seconds, press D for minutes.
ENT
A #####v (Current Relay A Comparison mode).
Press D until Comparison mode from the worksheet is displayed.
Table 13 – Setting Up the Relay Operation
36
TRICON
®
SmartTrol™ Installation and Maintenance Guide
Chapter 10: Setting Up the SmartTrol™
