WM620 AT
Command Manual
Copyright © Neoway Technology Co., Ltd
16
+SIGNAL: 1
OK
AT+SIGNAL=?
+SIGNAL: (0-1)
OK
Query the valid parameter value range.
Remarks
The setting of this command can be saved after the module is powered off.
2.7 Enabling or Disabling the Sleep Mode: +ENPWRSAVE
Description
To enable or disable the sleep mode
Format
AT+ENPWRSAVE=<n> <CR>
AT+ENPWRSAVE?<CR>
AT+ENPWRSAVE=?<CR>
Parameter
<n>:
0: Enable the sleep mode.
1: Disable the sleep mode
Return Value
See the Example
.
Example
AT+ENPWRSAVE=1
OK
Disable the sleep mode.
AT+ENPWRSAVE=?
+ENPWRSAVE: (0-1)
OK
Query the valid parameter value range.
AT+ENPWRSAVE?
+ENPWRSAVE: 1
OK
Query current sleep mode status.
Remarks
If the module communicates with the DTE only through UART, all the
following conditions must be met to let the module enter the sleep mode:
AT+ENPWRSAVE=0;
Set the SLEEP_IN pin low level (by default)
