Neoway WM620 Series At Command Manual Download Page 153

Page: 153 / 160

WM620 AT

Command Manual

142

A.5 Flowchart of Receiving SMS Messages

Figure A-4 Flowchart of receiving SMS messages

AT+CSQ\r

AT+CREG?\r

Start the module

5. Check the RSSI.

+CSQ: 99, 99

indicates no signal.

+CSQ: 21, 99

indicates that the RSSI is 21.

6. Check the network registration status.

The module returns

+CREG: 0,1

+CREG:

0,5

indicating that it has registered a network.

Startup code

AT\r

ERROR

AT+CCID\r

ICCID

ERROR

No signal

3. Check whether AT commands are available.

4. Read the ICCID of the SIM card.
ERROR indicates that the SIM card cannot be
found.
Check whether the SIM card is inserted or the
card socket works properly.

1. Power on the module.

+EIND: 128

indicates that the module is

ready

There is signal

Not registered

+CREG: 0,1
+CREG: 0,5

AT+CMGF=1\r

AT+CSCS="GSM"\r

AT+CNMI=2,1,0,0,0\r

ERROR

Return ERROR

Waiting for new messages

7. Set the SMS mode.

Note:

AT+CMGF=1

indicates the text mode.

AT+CMGF=0

indicates the PDU mode.

8. Set the TE character set.

Note:
Select a format for the received content. For
details, see the command set.
In general, set it to GSM for text format and
UCS2 for PDU format.

9. Set the SMS message notice format.

Note:

AT+CNMI=2,1,0,0,0

indicates there is a

reminder for new messages and the messages
are stored rather than directly displayed.

AT+CNMI=2,2,0,0,0

indicates the messages

are displayed with the indication code rather
than stored.

Summary of Contents for WM620 Series

































































































































































Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands

Neoway WM620 Series, At Command Manual

Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands