Neoway WM620 Series At Command Manual Download Page 10

Page: 10 / 160

WM620 AT

Command Manual

Boot LOG Instruction

After the 3G/GPRS module is booted, the UART1 outputs the following boot LOG:

+EIND: 128

+EUSIM: 1

LOG

LOG Description

+EIND: 128

Indicates that the module starts up successfully and can receive AT
commands.

+EUSIM: 1

Detect the SIM card.

For a China Mobile card, the module returns

+EUSIM:

For a China Unicom 2G card, the module returns

+EUSIM:

When the module does not detect any SIM card, the module returns

+EUSIM:ERROR

The return values are varied with MNC:

+EUSIM:0 for MNC=00/02/07

+EUSIM:1 for MNC=01/06

+EUSIM:2 for other MNC values

+EUSIM:ERROR indicates that the module did not detect SIM card.

Remarks

Users can determine whether the module starts up successfully or not by
detecting "+EIND:128".

Summary of Contents for WM620 Series

































































































































































Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands

Neoway WM620 Series, At Command Manual

Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands