Neoway WM620 Series At Command Manual Download Page 159

Page: 159 / 160

WM620 AT

Command Manual

148

Start the module

Startup code

AT\r

AT+CCID\r

AT+CSQ\r

AT+CREG?\r

AT+CGDCONT=1, "IP", "CMNET" \r

AT+XIIC=1\r

AT+XIIC?\r

3. Check whether AT commands are
available.

1. Power on the module.

2. ...

+EIND: 1

indicates that the module

is ready.

4. Read the ICCID of the SIM card.
If the module returns

ERROR

, check

whether the SIM card is inserted or
the card socket works properly.

5. Query the signal quallity.

6. Query the network registration
status.
If the module returns

+CREG: 0,1

+CREG: 0,5

, the SIM card registers

the network successfully.

7. CMNET is the APN of China
Mobile. APN varies with carriers.

8. Set up a PPP link.

9. Return value:

+XIIC: 1,10.232.165.29

indicates

the module sets up a PPP link
successfully.
The module IP is 10.232.165.29.

+XIIC: 0,0.0.0.0

indicates the PPP

link is not set up.

ERROR

CCID

There is signal

No signal

Registered the network

Not registered

ERROR

Valid IP

Failed to obtain the
IP address

The PPP link is

set up

successfully

Summary of Contents for WM620 Series

































































































































































Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands

Neoway WM620 Series, At Command Manual

Search results

Summary of Contents for WM620 Series

Reviews:

Related manuals for WM620 Series

Brands by name

Popular brands