Neousys Technology Nuvo-5095GC Series User Manual Download Page 30

Page: 30 / 97

Nuvo-5095GC Series User’s Manual

Note

Some off-the-shelf mini-PCIe 4G modules are not compliant to standard mini-PCIe interface. They

use 1.8V I/O signals instead of standard 3.3V I/O, and may have signal conflict on certain pins.

Please make sure your 4G module has the correct pin definition or consult Neousys for the

compatibility. Installing an incompatible 4G module may damage the system or the module itself

may be damaged.

2.4.4 Internal SATA Port #1

Nuvo-5095GC series provides two SATA ports which support Gen3, 6 Gb/s SATA signals.

Each SATA port is composed of a 7-pin SATA connector and a 4-pin power connector.

SATA port #1 is used in conjunction with the HDD bracket to accommodate the first 2.5”

HDD/SSD. A dedicated cable is shipped with the system to provide standard 22-pin SATA

connector. For information of installing a HDD/SSD to SATA port #1, please refer to section

3.4 for detail.

Summary of Contents for Nuvo-5095GC Series




























































































Search results

Summary of Contents for Nuvo-5095GC Series

Reviews:

Related manuals for Nuvo-5095GC Series

Brands by name

Popular brands

Neousys Technology Nuvo-5095GC Series, User Manual

Search results

Summary of Contents for Nuvo-5095GC Series

Reviews:

Related manuals for Nuvo-5095GC Series

Brands by name

Popular brands