Nuvo-5095GC Series User’s Manual
Copyright © 2017 Neousys Technolgy Inc. All Right Reserved.
42
Chapter 3 Getting Start
In this chapter, we’ll illustrate how to disassemble your Nuvo-5095GC controller and install
all necessary components such as CPU, memory and hard drive. Please exactly follow the
procedures to prevent any damage on your Nuvo-5095GC controller.
3.1
Disassemble your Nuvo-5095GC Controller
In prior to install components such as CPU, memory and HDD to Nuvo-5095GC series, you
need to disassemble Nuvo-5095GC controller and expose the PCBA. Please cautiously
follow the procedures described here to prevent any damage on your Nuvo-5095GC
controller.
1. Put the Nuvo-5095GC controller upside down on a flat surface.
2. Unscrew four M3 flat-head screws and detach Cassette by pulling it up.
3. Unscrew seven hex bolts on the front panel and another seven hex bolts on the back
panel. And remove both front panel and back panel.
(another 7 hex bolts on the opposite side)
