Neousys Technology Nuvo-2400 Series User Manual Download Page 35

Page: 35 / 81

Nuvo-2400

User’s Manual

Page 35 of 81

3.3.1 PCI slot

Figure 21: PCI Slots of Nuvo-2430(left) and Nuvo-2421(right)

PCI slots are located on the backplane of Nuvo-2400 Series. Nuvo-2430 provides three PCI

slots and Nuvo-2421 provides two PCI slots. These PCI slots support 5V PCI bus. For

information of installing PCI cards, please refer to the section

“

Install an Add-on Card

”.

Note

Due to the fanless feature, the total power consumption of installed PCI and PCIe cards should be

confined to 12W to limit the heat generated by add-on cards and maintain the system stability. For

applications need add-on cards which consume more than 12W, the fan option is suggested to

maintain a reasonable temperature inside the chassis. Please contact Neousys Technology for the fan

option.

The operating temperature of the whole system when cards installed is affected by the power

consumption and operating temperature of add-on cards. Please consult your add-on card dealer or

Neousys Technology for further information.

Summary of Contents for Nuvo-2400 Series


















































































Search results

Summary of Contents for Nuvo-2400 Series

Reviews:

Related manuals for Nuvo-2400 Series

Brands by name

Popular brands

Neousys Technology Nuvo-2400 Series, User Manual

Search results

Summary of Contents for Nuvo-2400 Series

Reviews:

Related manuals for Nuvo-2400 Series

Brands by name

Popular brands