35
4103241J-35/A
4103980D/A
28/05/2001
Operation
2.2.2 Adjustment of the document alignment
(feeders B and C)
This adjustment is designed to align the bottom edges of the sheets
from feeders B and C.
It applies independently to any of the jobs.
The user is thus able to adapt the alignment of sheets from feeders
B and C to their grammage.
2.3 Position of the address and adjustment of the
folds
The machine folds automatically the documents, based on both
their dimensions and the envelope size.
2.3.1 Position of the address
If the address is not properly positioned with respect to the envelope
window, its position may be adjusted using the appropriate menu.
The menu may be accessed via the program end menu of the job
modification.
2.3.2 Adjustment of the folds
If the user requires specific folds, he may program the fold
dimensions via menu "fold customization" (see "modification of a
job").
1 mm
1 mm
When inserting several documents from the same
feeder into an envelope, be sure to adjust the folds
so that the upper portion of the folded document is
slightly (1 mm) longer than the lower portion.
Summary of Contents for SI60
