Neopost IS-280 iMeter User Manual Download Page 181

Page: 181 / 195

Troubleshooting

177

Weighing Problems

The Weighing Platform does not Weigh Properly

The machine does not seem to display a correct weight.

Check the weighing device as follows.

12.1 Weighing Problems

Display – – g indicates a weighing error.

Possible causes

Actions

There are vibrations or air drafts
in the weighing area.

Use a solid and steady table:

•

Far from any door.

•

Far from any fan.

Something is touching or laying
on the weighing platform.

Clear the weighing zone and re-zero the weighing
platform (See

Weighing Settings

p.132 ).

The weighing platform zero is not
correct.

See the weighing platform zeroing procedures in

Weighing Settings

p.132

To avoid weighing errors, make sure the weighing platform is
clear when starting the machine.

ALPHA1_IR.book Page 177 Jeudi, 15. décembre 2011 10:20 10

Summary of Contents for IS-280 iMeter




































































































































































































Search results

Summary of Contents for IS-280 iMeter

Reviews:

Related manuals for IS-280 iMeter

Brands by name

Popular brands

Neopost IS-280 iMeter, User Manual

Search results

Summary of Contents for IS-280 iMeter

Reviews:

Related manuals for IS-280 iMeter

Brands by name

Popular brands