Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
63
№
Command
Response
Parameters
Description
59
TRACK X,Y,Z,A
Example:
TRACK 5,15,500,10
TRACK X,Y,Z
Example:
TRACK 5,15,500
X=2..20
– minimum speed
Y=5..180
– angle in degrees
Z=50..5000
– distance in
meters
A=0..25
– speed change in
km/h/s
By default
X=3, Y=10, Z=500, A=25
Setting the route drawing quality. A new point is
put on the route if the travel direction changes
more than by the angle Y or the distance to the
previous point is bigger than Z or speed change
per second is more than A. This mechanism is
deactivated when the speed is fewer than X so
that there wouldn't be too many points at low
speed values. This parameter change might
cause improper function of the tracker
60
STATMASK X
Example:
STATMASK 1
STATMASK X
Example:
STATMASK 1
X
– the number determining
events which occurrence will
initiate formation of extra
packets. It is defined by the
sum of mask values (see the
Appendix A). By default X=
65535 (all events are
included).
Setting device status mask for reducing traffic
from the tracker to the server.
61
OUTPUT X
Example:
OUTPUT 1
OUTPUT X
Example:
OUTPUT 1
X=1
– output is active (linked
to the ground)
X=0
– output is not active
(disconnected from the
ground). By default, =0.
Handling tracker output. Command without
parameters restores to the output current
settings.
