Neomatica, LLC. Terminal ADM700 3G GLONASS/GPS. Ed. 7.2, dd. 24.11.2018
35
- perform a CAN-LOG connection to any of the RS-232 ports in accordance with the diagram
shown in Figure 14;
- set the required RS-232 port to the operation mode with CAN-LOG;
- enable transmission of the CAN data block with the
«PROTOCOL»
command or in the
graphical interface of the ADMConfigurator program.
Figure 14
– Connection layout of CAN-LOG to the RS-232 interface (12 +U vehicle electrical system)
7.5.4 Autotracker fuel level sensors connection
To connect the Autotracker fuel level sensors, do the following:
- connect the fuel level sensors to any of the RS-232 ports;