Neoline X-COP 9100, User Manual, Page: 22 / 34

22
Setting the G-Sensor sensitivity during driving.
Setting value : 1 ~ 10(10 is more sensitive)
15.2.11. Sensitivity(Parking)
Setting the G-Sensor sensitivity at Parking mode.
Setting value : Off/1~3(3 is more sensitive)
15.2.12. Motion detection(Parking)
1
Setting the Motion detection sensitivity at Parking mode.
Setting value : Off/1~3 (3 is more sensitive)
※
If both Sensitivity(Parking) and Motion detection(Parking) set all ‘off’, the video is to be recorded
by Driving mode.
15.2.13. Parking mode time
At the status of Car engine ON, Setting the time when it enters into the Parking mode since there is
no movement of car.
When Car engine is off, it enters into the parking mode immediately.
Setting value : Off/On/1min/5min/10min/15min/20min/25min/30min
15.2.14. Recording time (Driving)
Setting time for recording video file at the driving mode.
Setting value : 1min/2min/3min/5min
15.2.15. Loop recording (Event)
Setting On: Event recording file will be deleted in order automatically once the file is full.
Setting Off: ‘event folder has been full’ message will be shown once the file is full and the video will
be recorded by driving mode.
Setting value : On/Off
15.2.16. GPS satellite announce
When GPS satellite has been fixed, voice will be announced.
Setting value : On/Off
15.2.17. GPS based time
Setting time display by GPS based time or not.
1 Motion detection is the function to record the previous 10 seconds and after 50 seconds once any motion is
recognized.