37
the small pliers tool. If the belt is loose, you can cut off a section of the belt and
reinstall it.
5.4 Daily Maintenance
SMT Pick and Place machine is a relatively complex high-tech and
high-precision machine, which requires working in a constant temperature, humidity
and very clean environment, and maintaining the habit of regular maintenance.
Operators should read the user manual carefully to understand the correct use of
the machine and its parts.
Operate in strict accordance with the operating rules of the machine. It is not
allowed to operate the machine if there is something with the machine. If a fault
is found, the machine should be stopped in time, and reported to the technical
personnel or equipment maintenance personnel, and it can be used only after the
fault is eliminated.
The operator is required to concentrate on the operation process with eyes
attendance, ears attendance and hands attendance.
◆
Eyes attendance---Observe whether there is any abnormal phenomena when the
machine running. For example, the peeling device does not work, the plastic tape
is broken, and the placement position is not correct.
◆
Ears attendance---Listen to machine running and see whether there is any
abnormal sound, such as the abnormal sound of the placement head, the abnormal
sound of missing components, the abnormal sound of the transmitter, the
abnormal sound of the scissors, etc.
◆
Hands attendance--If any abnormal phenomena is found, it should be solved in
time. Some small problems can be solved by the operator themselves, such as
solving the problem of pulling needle stuck and correcting the placement position.
If there is something wrong with the machinery and circuit, be sure to ask the
maintenance personnel to check and repair.
Summary of Contents for YY1
