36
shape.
4. If you need the sheet metal with bigger pressure, you can use some tool to make it
more bend.
5. Long time use will bring the tape feeder damping piece serious abrasion and lead
to friction disabled, please replace new tape feeder damping piece.
5.3 How to Adjust the Belt Tightness
Automatic preloading springs are installed on the X and Y axis belts. Under
normal circumstances, there is no need to adjust the belts within a certain range.
Adjust X axis belt tension: Loosen the two screws of the belt fixing seat on the
left or right side of the X axis. The fixing seat can be moved left and right to
adjust.
Adjust Y axis belt tension easily.
As shown in below pictures, you can easily remove or install the Y axis belt or
X axis belt. There is a groove in the middle of the X axis belt seat for the use of
1
2
3
4
Summary of Contents for YY1
