16
2) After the board arrives to its destination, click “change to current position” button, it will pop up a
message(refer to the image as below), click “Yes”, then the down-looking camera will start to recognize
fiducial marks.
3) After that, coordinates will be automatically converted to absolute values(machine coordinate) according to
the location and angle of board.
Then you can click align to adjust coordinates accordingly.
2.1.3.4. Import PCB Coordinate File
Generate the coordinate file from PCB layout, make sure the unit is metric and the format is .csv. After
re-arrange the sequence of coordinate information that NeoDen3V could read, save and copy the file into
flash drive, connect it with the machine.
Go to the programming file screen, unselect “Manual”, click “ Import Top file” button (refer to Illus.2.1.3.4),
select the coordinate file in the pop up. All the data will be imported automatically.
