Page
24
of
76
The following picture shows the
‘Setup Input’ panel for the wiring setup. The
Setup Input
panel
allows changing the input wiring, input ranges, sensors and scale factors.
By changing any of these parameters the measurement is restarted.
If data is currently stored, the change of these settings is disabled.
The System selection allows to setup these setting to actual system only or to all systems.
Select a wiring type (1).
Select a voltage input range (2).
Select a current sensor (Clamp/Rogowski) and input range (3).
Select a scale factor (4).
Finally click on “Apply” button to save all changes (5)
1
1
2
3
4
5
Summary of Contents for PQA8000
Page 32: ...Page 32 of 76...
