Page 12
09604-ML001 REV01 ECN 5297
2.4 Replacing the Power Data Panel Kit
CAUTION: Servicing of this product or unit is to
be performed by trained service personnel only.
1
2
3
4
Power Data Panel Assembly
STEP 3
Open the Power Data Panel Assembly
to access the cables at the back of the
enclosure.
STEP 1
To access the Power Data Panel Assembly
you need to unlock and open the Right Hand Side
door.
Unlock the Lower Lock at the front of the door
and pull the top corner of the door to open.
STEP 4
Unplug the Molex connectors and
Disconnect all the cables from the rear of the
Power Data Panel Assembly
STEP 2
Unscrew the 2 screws securing the
enclosure to the chassis
Chapter 2 - Servicing
Caution :
This Kiosk is equipped with an
Uninterruptable Power Supply (UPS)
Prior to service by service by a certified
technician, for operator safety, ensure mains
cable is disconnected from the kiosk and the
UPS is switched OFF Refer Section 2.0
Powering OFF procedure.
