Page 18
09604-ML001 REV01 ECN 5297
2.7 Replacing the Non Zepetronics cover
CAUTION: Servicing of this product or unit is to
be performed by trained service personnel only.
1
2
3
STEP 3
Remove the Printer door by tilting
from the top then lifting upwards.
STEP 4
Refit the door by aligning the side tab
into the chassis vertical slot
and inserting the tab at the base of the door into
the bottom opening in the chassis.
Secure the Printer door with the 2 screws
removed in step 2
STEP 2
Undo the 2 front screws that secure the
Printer door.
STEP 1
Unlock and open the both Access Doors.
Lift the Passport top cover up and pull the
passport cover stay forward to lock it in place.
Note: Ensure the passport cover stay is engaged
and the cover remains open.
4
Chapter 2 - Servicing
