5.2.2
Please note that the fan heater can become
very
hot
and
should,
therefore, be
placed
at a safe
distance
from flammable
objects
such as
furniture, curtains
and
similar.
5.2.3
Do not
cover
the fan
heater.
5.2.4
The fan heater must not be
located
immediately
below a socket
outlet.
5.2.5
Do not connect the fan heater using an
on/off
timer or other equipment which can automatically switch the
device
on.
5.2.6
The fan heater must not be
placed
in rooms where flammable
liquids
or gases are
used
or
stored.
5.2.7
If
an extension
cord
is
used,
it must be as short as possible
and
always be fully
extended.
5.2.8
You must not connect other appliances to the same mains socket as the fan
heater.
5.2.9
Do not use this fan heater in the
immediate
surroundings
of a bath, a shower or a swimming
pool.
5.2.10
If
the supply
cord
is
damaged,
it must be
replaced
by the manufacturer, its s
ervice
agent or similarly
qualified
persons in
order
to
avoid
a
hazard.
5.2.11
Make
sure heater is always
under
surveillance
and
keep
children
and
animals away from it;
5.2.12
Do not place the appliance on
moving
vehicles
or some where easy to be
tipped
over.
5.2.13
When you
don’t
use the appliance for a long time, unplug the
appliance.
Don’t
leave
the heater for a
considerable
amount of time when in
use.
Pull the plug straight out,
never
remove
the plug by pulling on the
cord.
5.2.14
Keep
the heater far from curtain or places where the air inlet can easily be
blocked.
5.2.15
The power coupler is waterproof when not in
use.
In
order
to
prevent
possible electric shock or leakage current
,never
use the appliance with
wet
hand
or operate the appliance when there is water on the power
cord.
5.2.16
Do not
dispose
of electrical appliances as
unsorted
municipal waste, use separate collection
facilities.
Contact you local
government
for
information
regarding
the collection systems
available.
If
electrical appliance are
disposed
of in
landfills
or
dumps,
hazardous
substances can leak
into the
groundwater
and
get into the
food
chain,
damaging
your health
and
well-
being.
5.2.17
This appliance is not
intended
for use by persons
(including
children)
with
reduced
physical, sensory or mental capabilities, or lack of
experience
and
knowledge,
unless they
have
been
given
supervision
or instruction concerning use of the appliance by a person responsible for their
safety.
5.2.18
Children
should
be
supervised
to ensure that they
do
not play with the
appliance.
6.
Using
Instructions
6.1
Position the fan heater so that it
stands
upright on a firm surface
and
at a safe
distance
from wet
environments
and
flammable
objects.
6.2
Connect the fan heater to the
mains.
6.3
Set the thermostat knob to the
MAX
and
let the heater operate with full
power.
6.4
The fan heater will switch on when the heating selector is set to one of the power
settings.
6.5
Once the room reaches the
required
temperature, heating element will stop
working.Once
the temperature
decreased,
the heating element will
be
working.
The fan heater now starts
and
stops automatically
and
thus keeps the room temperature
constant.
6.6
Before switch off the heater, please turn the thermostat to
MIN
position
and
turn the switch to fan position, let the appliance cool
down
for two
minutes then turn off the heater
and
pull out the
plug.
7.
Cleaning and
Maintenance
7.1
Before cleaning the
appliance,disconnect
it from the socket
and
let it cool
down.
The enclosure is easily to get
dirt
y, wipe it often with soft
sponge.
For
every
dirty
parts, wipe with a sponge
dipped
in
<50°C
water
and
mild
detergent,then
dry
the heater enclosure with clean
cloth.
Be careful not to
let the water enter the appliance
inner.
Don’t
splash water onto the hea
ter,never
use
solvent
like gasoline
etc.
to clean the heater,in
order
to protect
the
enclosure.
7.2
Clean the
cord
and
plug,dry
and
pack it in a plastic
bag.
7.3
When you store the heater, let it cool
down
first, keep it
dry.
Then
cover
it with a plastic bag, put in a packing box
and
store it in a
dry,
ventilated
place.
8.
Trouble
shooting:
You can
solve
many common problems easily,
saving
you the cost of a possible
service
call.
Try the suggestions below to see if you can
solve
the
problem before calling the
service
center.
Problem
Possible cause
Treatment
The heater
does
not
operate,even
when it is
plugged
in
and
the
switch, thermostat are
switched
on
.
The plug is loose,
bad
connection
Pull out the plug, check the connection of the plug
and
socket
.
Then connect
again.
No
power in socket outlet
Insert
the plug in a proper socket
The appliance
didn’t
heat up, or only
ventilator
worked
The switch was not put at heating setting
Turn the switch to heat setting
The thermostat
operated
Turn the thermostat
and
listen if there is
open/close
voice.
If
there is no click
and
the thermostat is not
damaged,
the heater will automatic switch on when
the appliance
cooled
down
Manual
reset cut-out
operated
Turn the heater off
and
inspect the blockage of inlet
or
outlet.
Disconnect the plug
and
wait at least 10
minutes for the protection system to reset before
attempting to restart the
heater.
Abnormal noise
The appliance is not
stands
upright
Put the heater on a
level
surface
Disposal
Waste electrical
production
should
not be
disposed
of with
household
waste.
Please recycle where facilities
exist.
Check with your
Local
Authority or retailer for recycling
advice.
Environmental
Protection
Model
identifier(s):
90-060
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space heaters only (select
one)
Nominal
heat output
Pnom
2.0
kW
Manual
heat charge control with
integrated
thermostat
[yes]
Minimum
heat output
(indicative)
Pmin
1.1
kW
Manual
heat charge control with room
and/or
outdoor
temperature
feedback
[no]
Maximum
continuous heat
output
Pmax
2.0
kW
Electronic heat charge control with room
and/or
outdoor
temperature
feedback
[no]
Auxiliary electricity consumption
Fan
assisted
heat output
[no]
