EN
TRANSLATION OF THE ORIGINAL INSTRUCTION
FAN HEATERS
90-060 / 90-061
NOTE:
BEFORE THE
EQUIPMENT
IS
USED FOR THE
FIRST
TIME,
READ
THIS
INSTRUCTION
MANUAL
AND
KEEP
IT
FOR FUTURE
REFERENCE.
PEOPLE
WHO HAVE
NOT
READ
THIS
INSTRUCTION
SHOULD
NOT
ASSEMBLE,
LIGHT,
ADJUST
OR OPERATE THE
UNIT
DETAILED SAFETY REGULATIONS
ATTENTION!
Read
carefully-The
infrared
heater is
designed
for safe
operation.
Nevertheless,
installation, maintenance
and
operation of the heater can
be
dangerous.
Observing
the following
procedures
will
reduce
the risk of fire, electric shock,
injury
to person
and
keep installation time to
a
minimums.
1.1
This appliance can be
used
by
children
aged
from 8 years
and
above
and
persons with
reduced
physical, sensory or mental capabilities or lack
of experience
and
knowledge
if they
have
been
given
supervision
or instruction concerning use of the appliance in a safe way
and
understand
the
hazards
involved.
Children
shall not play with the
appliance.
Cleaning
and
user maintenance shall not be
made
by
children
without
supervision.
1.2
WARNING:
In
order
to
avoid
overheating,
do
not
cover
the
heater.
1.3
Children
of less than 3 years
should
be kept away unless continuously
supervised.
1.4
Children
aged
from 3 years
and
less than 8 years shall only switch
on/off
the appliance
provided
that it has been
placed
or
installed
in its
intended
normal operating position
and
they
have
been
given
supervision
or instruction concerning use of the appliance in a safe way
and
understand
the
hazards
involved.Children
aged
from 3 years
and
less than 8 years shall not plug in, regulate
and
clean the appliance or perform user
maintenance.
1.5
CAUTION
-some parts of this
product
can become
very
hot
and
cause
burns.
Particular attention has to be
given
where chi
ldren
and
vulnerable
people are
present.
2.
Introduction
2.1
Depending
on the power
cord
type this fan heater may be
used
only in
household,
warehouses
and
workshops,
building
sites or greenhouses
depending.
It
incorporates a thermostat
and
a self-resetting thermal cut-out to control the heating
elements.
The thermostat feels the air temperature
and
controls the
surrounding
temperature.
The fan motor is
controlled
by thermostat
and
it stops working when the thermostat cuts off the heating
element.
The self-resetting thermal cut-out will switch off the heater to ensure the safety when
overheating.
2.2
When using the heater for the first time, you may notice a slight emission of
smoke.
This is quite normal
and
it stops after a short
time.
3.
Technical
specific
ations
Model
90-060
90-061
Waterproof of Class
NA
NA
Voltage
220-240V~
220-240V~
required
power
2000W
3000W
current
8.3
-
9.1A
12.5
-
13.6A
Setting
20/1000/2000W
7/2000/3000W
Manual
reset Thermostat
65°C
65°C
Product
meast (mm)
210×130×260
234×130×284
N.W.(KG)
1.45
1.47
3.1
Housing of steel plate
and
coated
by heat-resistant
powder
.
3.2
Supplied
complete with
cord
and
plug
.
4.
Description
of
Control
Panel
90-060
90-061
4.1
Left
Knob
:
selector with heat setting
the
device
is
turned
off
fan on
the heating element works at half power
the heating element is working at full power)
4.2
Right
Knob
:
Thermostat
dial
5.
Special
safety
regulations
5.1
Before use, please check the marking on the power
cord.
Depending
on the power
cord
type this appliance may be
used
in
different
ambient
conditions:
Type
You can use the appliance in
Do not use in
H05VV
-F
household,
warehouses
and
workshops,
building
sites or greenhouses
building
sites or greenhouses
H07RN
-F
household,
warehouses
and
workshops, buil
ding
sites or greenhouses
H05RN
-F
household,
warehouses
and
workshops or greenhouses
building
sites
H05RR
-F
household,
warehouses
and
workshops
building
sites or greenhouses
5.2
When using electrical appliance basic precautions
should
always be followe
d
including
below:
5.2.1
The fan heater is not suitable for use
outdoors
in
damp
weather, in bathrooms or in other wet or
damp
environments.
