NOTE1:
Your phone can ask for
confirmation
and you can get the pop-up message “Confirm
that the passkey “…” is shown on NEO CAR AUDIO-CAR”. Click “PAIR” then. Some phones can
ask for pin code
.
Please enter
0000
.
NOTE2:
Certain vehicle electrical systems may activate Neo Car Audio unit and BLUBTDV9
upon vehicle unlock.
NOTE3:
BLUBTDV9 is on as long as vehicle is on. If radio is OFF, and you are receiving a call,
you can answer automatically by turning ON radio and selecting NEO CAR AUDIO mode.
2.3 Operating with more than one playing source connected.
If you have any audio player connected to the NEO CAR AUDIO-V9 Kit via
AUX
port please
disconnect the player. You can leave AUX cable in its place. BLUBTDV9 will not be able to mute
the audio player connected via AUX cable.
2.5 Using your phone in the hands-free mode
Once the Bluetooth is paired with the phone and the stereo is in proper radio emulation mode
you can start using your phone hands free. Once you receive the phone call the stereo will mute
and you will hear the incoming call. Once you
receive the call
you are able to:
1. Answer Call – Press next track or track up.
2. Reject Call – Press previous track or track down.
3. End Call -- Press previous track or track down.
4. Call Waiting (answer a second call) -- Press next track or track up.
5. Voice dialing- Press SCAN twice within 3 seconds while in NEO CAR AUDIO mode
To
make a phone call
:
1. Dial the phone number on your phone.
2. Once the phone is dialing the music mutes and you start hearing the dialing. Once the phone
is answered you will start using it hands-free.
NOTE:
If your stereo is in mode different then kit emulation mode (FM, XM, etc.) and
you receive a phone call – please enter the correct mode by selecting it on the car stereo.
Entering emulation mode will automatically accept the call.
2.6 Streaming your music wirelessly and using A2DP Audio Controls
With the NEO CAR AUDIO Bluetooth Dongle you are able to stream the music from your mobile
phone directly to the car stereo system wirelessly and control it with the car stereo/steering
wheel controls.
1. When A2DP (advanced audio distribution profile) music starts playing, other audio will mute
and A2DP will play.
2. To stop music playing -- stop playback on your phone. Playback of the previously selected
source will resume.
3. Control A2DP music track selection by using track up and track down on car stereo or
steering wheel buttons.
4. Changing car radio modes will pauseA2DP playback.
