Neo Car Audio ProLink 3V9 Installation And Operation Instructions Manual Download Page 1

 

 

 

NEO ProLink 3V9-BT 

Installation and operation instructions 

Chapter 1 – Getting Started 

1.1 Subject 

The Neo ProLink V9 adapter—an integration that links between an iPod (and iPhone) and a car stereo. The ProLink 

adapter features are: 

- iPod/iPhone© play, charge and control via EXT2 port. 

- Bluetooth capability via additional EXT1 port and Bluetooth Dongle for hands free and wireless audio streaming 

from your mobile phone. 

-  AUX-IN 3.5mm connector for many other audio devices such as XM radio, MP3 or DVD player. via EXT1 port. 

- Firmware upgradeable via micro SD card, universal adapter that fits into many car makes. 

1.2 Introduction 

Thank you for purchasing the Neo ProLink adapter. It has been designed to provide endless hours of listening 

pleasure through most vehicles’ factory radios. You will be able to control your iPod/iPhone with the car stereo 

buttons or steering wheel controls, and your iPod/iPhone will stay charged when connected to the car stereo. 

Additional EXT port will allow you to connect Bluetooth Dongle or any other audio device that has 3.5mm plug. To 

ensure that your iPod/iPhone performs correctly in your car or truck, we recommend that you read your vehicles 

section in this manual before attempting to install the interface. 

1.3 Precautions 

Proper mounting location 

Securely install the interface in a location that is free from heat, humidity, moving parts, or direct sunlight. Beware of 

the hot airflow from your vehicle’s climate control system. We recommend securing the interface to a suitable 

location that is free of sharp metal edges using double-sided tape, Velcro, or wire ties. 

The iPod/iPhone has not been designed to withstand extreme automotive temperatures. You may damage your 

iPod/iPhone if you leave it inside your vehicle on a very hot or very cold day. For further information, please refer to 

your iPod/iPhone manual. 

1.4 Disclaimer 

  This product is not affiliated with any OEM manufacturers. 

  Modifying the radio may void any outstanding warranty. 

  The purchase of this product carries with it no warranties, either expressed or implied.  

  While every care has been taken to provide a quality product, we cannot guarantee that the Neo iPod 

adapter will function correctly if installation is not done according to the instructions provided in this guide. 

Summary of Contents for ProLink 3V9













Reviews: