- 7 -
LLWS - Low light Warning System: it will remind the driver when low light environment.
ADAS Calibration
：
show purple/red two lines, purple line represent the farthest line,
and red line represent the nearest line to vehicle headstock, DVR could distinguish
whether there's vehicle in front (FCWS) or whether the vehicle change lane
(LDWS)according to these two lines,
。
So when open the ADAS setting, please set these
two lines firstly accordingly, press up/down button directly to adjust the purple line, press
MODE button then press up/down button to adjust the red lines.
G-sensor setting
：
Four modes
：
off/high/middle/low the default is middle
，
recommend
the default is middle
。
Motion detection
：
on/off the default is off, recommend the default is off.
MIC
：
on/off the default is on, recommend the default is on.
Park Mode:
on/off, the default is off (park mode requires permanent power)
System setting:
After power on enter the video mode, the video icon will be shown on the LCD top left
corner: short press MENU button twice to switch the system setting, the video icon will be
shown on the LCD top right corner: there are 4 setting options at the first page( Language
setting, Car Volume, System Mode, Drive ID Setting); there are 4 setting options at the
second page
（
Time setting, Format, Default setting, Auto Power off setting
）：
there are 4
setting options at the third page
（
Backlight setting, Delay power off, GPS setting, Warning
tone setting
）
; there are 2 setting options at the forth page ( Version information
）；
short
press down button to switch the setting options, short press OK button to enter the setting,
short press up/down button to modify the setting, and short press OK button to confirm the
modification.
Attention
：
Under the video status no any use to press MENU button, first stop recording,
then press MENU button twice to switch the system setting
