PROGRAMMING INSTRUCTIONS
Front Panel Layout
Looking at the front panel (see figure 3), you see a large LCD, 4 rubber buttons, one large
rotary dial, and two small rotary dials. The rubber buttons are marked
SELECT
and
ADJUST
and are the heart of Nelson’s exclusive
SELECT&ADJUST™
programming. The keys are
identified with
for increasing or decreasing the segment you’re working on.
SELECT&ADJUST™
works on the principle that you first
SELECT
what you want to set, and
ADJUST
the variables of what you selected. For example, if you want a run time of 10 minutes
on zone 5, you would use the
SELECT
keys to select zone 5 and, once on zone 5, you
would use the
ADJUST
keys to set the run time to 10 minutes.
There are instances when only
SELECT
or only
ADJUST
are required. They will be explained
in this guide where appropriate.
10
