![background image](http://html.mh-extra.com/html/nelson/5700/5700_user-manual_3050156007.webp)
Important:
Read all instructions before
inserting batteries. Be sure to save this booklet
for future reference.
If you have any questions regarding your new
electronic water timer, please call our free
Technical Assistance Hotline (1-800-489-4568).
Important Safety Information.
■
This timer is not for use inside buildings.
■
Use fabric reinforced hoses only – damaged or
cracked hoses should be replaced and not used.
■
The timer should not be used in damp pits or
under earth’s surface.
■
Mount the timer in a vertical position only.
■
Check connections regularly for tight sealing.
■
The hose should not be pulled since
connections and the housing could
be damaged.
■
When using for the first time, observe progress
of the program for one week to ensure the unit
is operating properly.
■
Before a long absence, such as a vacation,
insert new batteries and test your program.
■
When storing, make sure the unit is completely
empty of water and in a frost-free environment
only. Remove the batteries.
■
Use alkaline batteries only, size C. Do not use
rechargeable batteries.
■
Use original accessories only.
Warning:
These units are not intended for
inside use, i.e., offices, apartments or houses,
nor for professional watering applications.
Caution:
Detach timer from faucet during
freezing weather. This product is intended for
outdoor watering only. Do not use with water
exceeding 100° F(38° C) or with pressures
exceeding 100 psi. Avoid excessive pulling
or tugging on the hose as damage to timer
may result.
Operating Controls
1. Water connection
2. Battery compartment
3. Hose connector
4. Display for Model 5750
5. Control panel
6. Delay key for programming
7. Duration key for programming
8. Water Days key for programming
9. Program Review key
10. Manual Open/Close key
11. Housing cover (5750)
Specifications
Electronic Water Timer
5700 or 5750
Water connection
3/4”
Hose connection
3/4”
Weight
10.8 oz (without batteries)
Watering cycles (on and off)
1 per 24 hour period for 5700
2 per 24 hour period for 5750
Batteries
2 x 1.5V, Alkaline
NEDA/ANSI, 14A, IEC LR 14,
Type C
Number of keys
5
LCD (Liquid Crystal Display)
Size 1.4” x 0.4”
(5750 only)
Programming Span
1 to 3 days
Low battery detection Timer will stop running
when battery voltage is low
Inserting & Replacing Batteries
■
Use Alkaline
batteries only,
size C. Do not
use rechargeable
batteries.
■
Before every battery change, turn off the timer’s
water supply at your outdoor faucet and then
remove it from the faucet.
■
Open battery compartment and insert them
in accordance with the markings in the
compartment.
Replacing batteries:
When batteries in either model are exhausted, the
5700 LED will flash, the 5750 LCD will show it.
Timer will close the water valve and will no longer
follow watering instructions.
Automatic Delay:
After you have completed programming your
first watering cycle, the timer will delay for a
period of 10 seconds. The timer display will
clear and show ‘Cycle 2’, (5750 only) indicating
that your first program has been accepted, and
the second cycle may now be programmed. The
automatic delay will occur again after you have
programmed cycle two.
Installation.
Now that your timer is
programmed, it is time
to install the unit to
your faucet.
1. Holding the unit steady, screw the collar onto
the faucet until it is finger tight. DO NOT use
a wrench or pliers.
2. Attach a garden hose to the connection on
the bottom of the unit. Makes sure there is
a good washer in the hose fitting.
3. Make sure timer valve is closed. Turn on
the water at the faucet. Your timer will now
water automatically.
1. Reset.
Press DELAY and WATER DAYS
keys at same time and hold
4 seconds. Release the keys,
and view ‘PRGM’ on 5750 display
or a flash on the 5700 indicating unit is reset.
2. Delay.
Press DELAY key to delay start
time. Each press delays start time
1 hour from current time, up to
20 hours from now. Note: This
unit does not contain a clock. Watering start time
is set from current time.
If you exceed the 20 hours, the delay will
‘rollover’ to one hour and the timer will accept
more key
presses.
3. Duration.
Press DURATION key to set
watering time. On the 5700,
each press will increase duration
15 minutes, up to 4 hours. On
the 5750, each press will increase watering
duration 1 minute up to 30 minutes and
15-minute increments from 30 minutes
to 4 hours.
Note: You must press this key at least once
to have a valid program, otherwise the timer
will flash continuously or display ‘ERR’.
If you exceed the 4 hour maximum, the
time will ‘rollover’ to 15 minutes (5700),
or 1 minute (5750), and timer will continue
to accept more
key presses.
4. Water Days.
If you do not press the WATER
DAYS key, the program entered
will water today only. If you press
WATER DAYS once, program will execute every
day, if you press twice every other day, and if you
press three times every third day. Schedule will
be repeated automatically until you turn off the
faucet or until batteries are exhausted.
Pressing the WATER DAYS key more than three
times will cause timer to ‘rollover’ to water today
only. Additional presses will program as
explained above.
5. ‘Cycle 2’ and Program
Acceptance.
Wait 10 seconds after the last key stroke. On
5700 light will flash indicating program is
accepted. On 5750 timer display changes to
‘CYCLE 2’. If you do not need an additional
watering cycle, wait 10 seconds and display
will change to ‘AUTO’.
To program cycle two, wait 10 seconds after last
key stroke in cycle one. Timer display will show
‘CYCLE 2’. Continue programming second cycle
as you did the first.
Wait 10 seconds for the unit to accept cycle two
program data. Upon acceptance, you will see the
display change to ‘AUTO’.
If you do not program cycle two before the ‘AUTO’
display appears (after one programming cycle)
but decide you would like to, you must reset the
timer and start again.
The timer display will show ‘ERR’ if an error was
made in programming, like setting overlapping
water cycles, or if no duration instructions for
either of the two cycles was entered.
6. Program Review.
On the 5700, when the Program
Review key is pressed, the light
will flash the sequence of key
presses (separating each key’s
number of presses by a pause) On the 5750,
when the Program Review key is pressed, the
display will review the programs.
7. Record Your Program.
Write down the time, day and date of both
programs as well as your DELAY, DURATION and
WATER DAYS selections for future reference.
Day of programming
SU MO TU WE TH FR SA
Date
_/_/_
Time of day
__:__
DURATION
__:__
DELAY
___hrs
WATER DAYS
Today only
Every day
Every second day
Every third day
Sample Program.
Suppose you want your timer to start watering
4 hours from now. For a total of 45 minutes
every other day. All it takes is 4 easy steps.
Step 1.
Reset timer by pressing DELAY and
WATER DAYS keys at the same time
for 4 seconds.
Step 2
. Press DELAY key 4 times (once
for each of the 4 hours of desired
delay time).
Step 3.
Press DURATION key 3 times
(each press adds 15 minutes of
watering time).
On the 5750, hold the DURATION key
until it scrolls to 0:45 min or press the
key 31 times.
Step 4
. Press WATER DAYS key twice (timer
will now water every other day).
After 10 seconds, the timer will show
program has been accepted with a flash
or the screen clears.
On the 5750, display now reads
‘CYCLE 2’. Suppose you would like to
program a second cycle that will begin
in 8 hours, will water for 15 minutes
once a day.
Step 1
Press DELAY key 8 times.
Step 2
Hold the DURATION key until it
scrolls to 0:15 minutes or press the
key 15 times.
Step 3
Press WATER DAYS key once.
After 10 seconds, the timer LCD will
now read ‘AUTO’, indicating the second
program has been accepted.
Manual Operation.
Anytime after installing batteries, the valve
can be opened or closed using the manual
OPEN/CLOSE key.
Press the MANUAL OPEN/CLOSE key to start
watering immediately. Press the same key again
to stop.
Important:
If left in manual mode, the valve will
stay open for a period between 60 and 75 minutes
and then will automatically close. This manual
open time limit is designed as a safeguard that’s
intended to prevent flooding if the timer valve is
accidentally opened. When the valve closes, it
may be manually opened again, if desired.
Care and Maintenance.
The following precautions should be taken:
1.
Always keep top cover closed when keyboard
is not in use.
2.
The timer may be used with water pressures
up to 100 psi.
3.
Do not leave timer on the faucet or store it
outside during freezing weather. Exposure to
temperatures below 32° F (0° C) may damage
the unit.
4.
Units must not be submerged in water or used
with hot water over 100°F (38° C).
5.
To ensure unit’s temperature remains below
100° F (38° C), do not expose it to direct
sunlight. We recommend the timer be used
only in shady areas.
Periods Not In Service.
1.
Look at the program record to reference time,
day and date entered.
2.
Programs may be reviewed by pressing the
PROGRAM REVIEW key.
3.
If no watering is intended for long periods
(i.e., during the winter season), simply
unscrew the unit from the faucet and press
the MANUAL OPEN key. In the spring, it is
recommended that the unit be reprogrammed
and new batteries inserted.
This timer is maintenance free. Replace weak
batteries immediately when the timer starts
flashing on 5700 (and LOBAT appears in the
display panel on model 5750). If the timer
should happen to fail despite the care taken in
manufacturing and testing, repair should be
performed by an authorized customer service
agent for L.R. Nelson Corp. (1-800-489-4968)
1
5
2
9
3
11
4
6
7
8
10
5700 and 5750 Electronic Water Timer Instructions
Trouble Shooting Guide
Problem
Probable Cause
Remedy
Improper or no display
Wrong battery contacts
1. Check for proper battery installation after reset
2. Clean battery contacts and reapply Battery &
Terminal Protection Compound
Display ERR after
Programming errors due to
Reset and reprogram
programming and
incorrect data such as overlapping
continuous flash
cycles or no watering durations.
Flashes every 7-8 seconds and
Batteries are weak
Replace batteries and reapply battery and LOBAT
display shows LOBAT (5750 only)
Terminal Protection Compound
Turning on or off at
Incorrect program
1. Double check the recorded time,
unexpected times
day and date you started the program
2. Reset and reprogram
Not turning on or -
Unit is not in AUTO mode
1. Make sure that the unit is in
off automatically
AUTO mode
2. Double check programming data
Valve cannot be opened
No program entered
1. Make sure that the unit has
manually been programmed
2. Check for proper battery installation
3. Clean battery contacts and reapply Battery &
Terminal Protection Compound
Faucet connection leaks
Bad hose washer
Install a new washer. Check for worn threads
Display is dark or black
Unit is too hot
Try to shade the unit or mount in cooler place
Battery life is short
Improper battery type
Replace batteries with alkaline type, reset and
reprogram the unit
If you still have problems, call our toll-free number 1-800-498-4568 any weekday (except holidays) from 8:00 AM to 5:00 PM central time.
Be sure you have your unit when you call.
Importante:
lea todas las instrucciones antes
de poner las pilas. No olvide conservar este
folleto para consultarlo en el futuro.
Si tiene preguntas referentes a su nuevo
regulador electrónico de agua, por favor, llame
a nuestra Línea especial de asistencia técnica:
1-800-489-4568. (Su llamada es gratuita.)
Importante información sobre
seguridad.
■
Este regulador no es para uso dentro
de edificios.
■
Use solamente mangueras reforzadas con tela:
las mangueras dañadas o agrietadas se deben
cambiar; no se deben usar.
■
El regulador no se debe usar en hoyos
húmedos ni debajo de la superficie de la tierra.
■
Monte el regulador exclusivamente en
posición vertical.
■
Revise las conexiones con regularidad,
en cuanto a sellos apretados.
■
No se debe jalar la manguera, ya que
se podrían dañar las conexiones y el
empotramiento.
■
Al usarlo por primera vez, observe el
progreso del programa durante una
semana a fin de cerciorarse de que la unidad
funciona debidamente.
■
Antes de una ausencia prolongada, tal como
unas vacaciones, ponga pilas nuevas y haga
una prueba de su programa.
■
Al almacenarla, cerciórese de que la unidad
esté completamente vacía de agua y solo en
un ambiente sin escarcha. Saque las pilas.
■
Use exclusivamente pilas alcalinas, tamaño C.
No use pilas recargables.
■
Use solamente los accesorios originales.
Advertencia:
estas unidades no son para
uso en el interior, v.g., oficinas, apartamentos
o casas, así como tampoco para operaciones
de riego profesional.
Precaución:
desconecte el regulador del
grifo en época de heladas. Este producto es
exclusivamente para riego al aire libre. No
lo use con agua a más de 38°C (100°F) ni con
presiones de más de 689,5 kPa (100 psi). Evite
tirar excesivamente de la manguera, ya que ello
podría provocar daños al regulador.
Mandos de funcionamiento
1. Conexión del agua
2. Compartimiento de pilas
3. Conector de manguera
4. Visualización para el Modelo 5750
5. Panel de control
6. Tecla DELAY para programar
7. Tecla DURATION para programar
8. Tecla WATER DAYS para programar
9. Tecla PROGRAM REVIEW
10. Tecla OPEN/CLOSE MANUALLY
11. Tapa del empotramiento
Especificaciones
Regulador electrónico de agua
5700 ó 5750
Conexión de agua
1,9 cm (3/4”)
Conexión de manguera
1,9 cm (3/4”)
Peso
306,18 g (10,8 onzas)
(sin pilas)
Ciclos de riego (abierto y cerrado)
1 por período de 24 horas para el 5700
2 por período de 24 horas para el 5700
Pilas
2 alcalinas de 1,5 V
NEDA/ANSI, 14A, IEC LR 14
Tipo C
Número de días
5
VCL (visualizador
Tamaño 3,55 cm x 1,02 cm
de cristal líquido)
(1,4” x 0,4”)
5750 solamente
Espacio de la programación
1 a 3 días
Detección de pilas
El regulador dejaráde
descargadas
funcionar cuando el voltaje
de las pilas esté bajo.
Para poner y cambiar las pilas
■
Use solamente pilas
alcalinas, tamaño C. No
use pilas recargables.
■
Antes de cambiar las
pilas, cierre el suministro de agua del
regulador en el grifo afuera de la casa, y luego
quítelo del grifo.
■
Abra el compartimiento de pilas y ponga las
pilas de acuerdo con las marcas que hay en
el compartimiento.
Para cambiar las pilas:
Cuando se hayan
agotado las pilas de cualquiera de los dos
modelos, destellará el DEL del 5700 y lo indicará
el VCL del 5750. En este momento el regulador
cerrará la válvula del agua y dejará de seguir las
precisas instrucciones de riego de Nelson.
Retraso automático:
Después de haber programado el primer ciclo de
riego, el regulador se retrasará por 10 segundos.
La visualización del regulador se despejará y
mostrará “Cycle 2”, (5750) indicando que se
aceptó el primer programa y que ahora se puede
programar el segundo ciclo. El retraso
automático se repetirá después de que haya
programado el segundo ciclo.
Instalación
Ya que el regulador está
programado, es hora de
instalar la unidad en el
grifo.
1.
Sujetando la unidad de modo estable, atornille
el collar en el grifo hasta que esté apretado al
pulso. NO use llaves ni tenazas.
2.
Ponga una manguera de jardín en la conexión,
debajo de la unidad. Cerciórese de que en el
adaptador de la manguera haya una arandela
en buenas condiciones.
3.
Cerciórese de que la válvula del regulador esté
cerrada. Abra el agua del grifo. El regulador
regará automáticamente.
1. RESET (Reposición)
Mantenga oprimidas, al mismo
tiempo, las teclas DELAY y
WATER DAYS durante cuatro
segundos y luego, suéltelas.
El visualizador del modelo 5750 mostrará
“PRGRM” y en el modelo 5700 se verá un
destello, indicando que la unidad
está
reajustada.
2. DELAY
Oprima la tecla DELAY para
retrasar el tiempo de inicio por
1 hora. Presionando la tecla cada
vez, podrá retrasar el inicio, de 1 a 20 horas, a
partir de ese momento. Nota: esta unidad no
contiene reloj. El tiempo de inicio de riego se
establece desde el momento actual.
Si excede el límite de 20 horas, el tiempo de
retraso volverá a ser de 1 hora, y el regulador
aceptará que
seoprima la
tecla más veces.
3. DURATION
Oprima DURATION para establecer el
tiempo de riego. En el modelo 5700,
cada vez que oprima esa tecla,
aumentará la duración 15 minutos, por hasta
4 horas. Cuando haga lo mismo en el modelo
5750, aumentará la duración 1 minuto, por hasta
30 minutos; y 15 minutos, desde los 30 minutos,
por hasta 4 horas.
Nota: tiene que oprimir esta tecla por lo menos
una vez para que haya un programa válido; de
no ser así, el regulador destellará continuamente
o mostrará “ERR”.
Si excede el límite de 4 horas, el tiempo de
retraso volverá a ser de 15 minutos (5700) o de
1 minuto (5750), y el regulador aceptará que se
oprima la
tecla más
veces.
4. WATER DAYS
Si no oprime la tecla WATER
DAYS, el programa regará
solamente el día de hoy. Si
oprime WATER DAYS una vez, el programa
se llevará a cabo todos los días; si lo oprime
dos veces, día por medio; y si lo oprime tres
veces, cada tres días. El horario se repetirá
automáticamente hasta que usted cierre el
grifo o se agoten las pilas.
Si se oprime la tecla WATER DAYS más de
tres veces, el regulador volverá a dar agua
hoy solamente. Las veces que oprima
adicionalmente, se programarán del modo
antes explicado.
5. “CYCLE 2” (“Ciclo 2”)
y PROGRAM ACCEPTANCE
(Aceptación del programa)
Espere 10 segundos después del último pulsado
de tecla. En el modelo 5700, destellará una luz
indicando que se aceptó el programa. En el
modelo 5750, la visualización del regulador
cambiará a “CYCLE 2”. Si no precisa un ciclo
de riego adicional, espere 10 segundos y la
visualización cambiará a “AUTO”.
Para programar el ciclo dos, espere 10 segundos
después del último pulsado de tecla en el ciclo
uno. La visualización del regulador mostrará
“CYCLE 2”. Siga programando el segundo ciclo
como programó el primero.
Espere 10 segundos para que la unidad acepte
los datos del programa del ciclo dos. En cuanto
sean aceptados, verá la visualización cambiar
a “AUTO”.
Si no programa el ciclo dos antes de que la
visualización “AUTO” aparezca (luego de un
ciclo de programación), y decide que desearía
hacerlo, debe reposicionar el regulador y
comenzar de nuevo.
La visualización del regulador mostrará “ERR”
si hubo algún error en la programación, tal como
disponer ciclos de riego superpuestos o si se
registraron instrucciones de duración para
cualquiera de los dos ciclos.
Regulador electrónico de agua Modelos 5700 y 5750
1
5
2
9
3
11
4
6
7
8
10