Nellcor OxiMax N-65, Service Manual

Page: 28 / 120

Performance Verification
22 O
XI
M
AX
N-65 Service Manual
Operational Setup
The operational setup procedure sets the time and date into the monitor. Refer to
the
O
XI
M
AX
N-65 Operator’s Manual for individual parameter settings. The
monitor returns to the factory default settings when it is powered on: therefore,
individual parameter settings need to be set at that time.
Setting the Time and Date
Discussion
WARNING: The O
XI
M
AX
sensor uses the date and time provided by the
O
XI
M
AX
N-65 when the patient alarm events are recorded to the memory
chip in the sensor. The accuracy of the date/time used for patient alarm
events depends on the date/time set in the monitor.
Note : When the monitor times-out in 30 seconds, the parameter is set and the
monitor display returns to the normal operation.
Normal operation means:
• the monitor is turned on
• a sensor is connected to the monitor
• the sensor is applied to the patient
• the patient’s %SpO
2
(oxygen saturation percentage) and pulse rate
readings (BPM) are being reported
• no error conditions exist
Procedure
To set the time and date:
1. With the monitor in normal operation, press the Power button to turn the
monitor off.
2. Press the Power button to turn the monitor on.