CLEANING THE MOTOR FILTERS
The motor filters are situated in the vacuum cleaner unit, under the dust container. The motor filters should be cleaned
regularly to ensure that the suction power is not reduced and that the motor is not overloaded.
1
Hold down the release button on the handle of the dust container and detach
the dust container from the vacuum cleaner.
2
Remove the small motor filter (C).
3
Tap the small motor filter out over an open dustbin. If necessary, you can rinse
the filter with clear, cold water.
4
Allow the filter to dry completely before inserting it again.
5
To remove the large motor filter, you must first open the filter cap (D).
6
The large motor filter is located directly beneath the filter cap. Remove the large motor filter.
7
Tap the large motor filter out over an open dustbin. If necessary, you can rinse the filter with
clear, cold water.
8
Allow the filter to dry completely before inserting it again.
9
Close the filter cap.
10
Insert the dust container back into the vacuum cleaner. You should hear a click
when it is locked into place.
STORAGE
Store the vacuum cleaner in a dry, cool place and out of reach of children when not in use.
Place the crevice and brush and the upholstery nozzles onto the storage holder (E).
Clip the storage holder onto the telescopic tube.
C
D
E
10
