KIMO
INSTRUCTION MANUAL
CHAIN ACTUATOR
Force 200N – Maximum stroke 2
Electrical feeding 24V
NEKOS
S.r.l. -
+39 0424 411011
EN
4420140 - Rev. 2006
KIMO 202
INSTRUCTION MANUAL
CHAIN ACTUATOR
Maximum stroke 250 mm
Electrical feeding 24V
Via Capitoni, 7/5 -
36064 Colceresa (VI)
+39 0424 411011 –
+39 0424 411013 - www.nekos.it - [email protected]
(VI) – ITALY
2
USER INSTRUCTIONS
CAUTION: Carefully observe all the following installation
instructions to ensure personal safety.
The device is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lacking experience and knowledge. Do not allow children to
play with the fixed controls and keep any remote-control units
out of their reach.
Have installation checks performed periodically by qualified
personnel from a service centre authorised by the manufacturer.
Do not use if repair or adjustment is required.
CAUTION: if the power cable is damaged, it must be replaced by
qualified personnel from a service centre authorised by the
manufacturer.
CAUTION. Disconnect the power supply during cleaning or
maintenance operations. Do not use solvents or jets of water to
wash the appliance; the appliance should not be submerged in
water.
In the event of fault or malfunction, switch off the device at the
main switch. All repairs and adjustments (e.g. setting the stroke)
must only be performed by qualified personnel from a service
centre authorised by the manufacturer.
Always request exclusive use of original spare parts. Failure to
respect this condition could compromise safety and invalidate
the benefits contained in the warranty for the appliance. In the
event of any problems or queries, consult your agent or contact
the manufacturer directly.
The A-weighted sound pressure level is less than 70dB(A).
Carefully preserve these instructions after installation.
