1. SPECIFICATIONS
Model
CT5721
Max. Air pressure
8 bar
No load speed
18000rpm
Avg. air consumption
6 cfm
Cutting blade
3”
Angle
0
o
Air inlet size
1/4”
Noise
L
PA
:90dB(A) L
WA
:101dB(A)
Vibration level
1.2 m/s
2
2. SAFETY WARNINGS
WARNING! When operating a pneumatic tool, it is recommended that you
always observe basic safety principles, including those listed below, in order to
reduce the risk of fire, electric shock and injury.
Please read and keep the entirety of this instruction manual before using the tool.
CAUTION! Read all of the following instructions. Failure to do so may result in
electric shock, fire, or personal injury. The term “air tool” used in these
instructions refers to all tools operating by means of a compressed air stream at
the correct pressure.
General safety conditions
Due to multiple hazards, read and understand the safety instructions before
starting installation, operation, repair, maintenance and alteration of accessories
or when working in the vicinity of a air tool. Failure to do so may result in serious
injury. Air tools may only be installed, adjusted and assembled by qualified and
trained personnel. Do not modify the air tool. Modifications can reduce efficiency
and safety and increase the risk for the tool operator. Do not throw away the
safety instructions, they should be handed over to the tool operator. Do not use
the air tool if it is damaged.
