background image

potential hazards and limitations for your unit.

This equipment is designed for specific applications. Do not modify or use for

any application other than which it is designed.

Store the pressure washer in a well ventilated area with the fuel tank empty.

Fuel Should not be stored near the pressure washer.

Never operate under these conditions:

a. A noticeable change in engine speed.

b. A noticeable loss of pressure.

c. The engine misfires.

d. Smoke or flames are present

e. Enclosed compartment.

f. Excessive vibration.

g. Rain or inclement weather.

Water spray must never be directed towards any electric wiring or directly

towards the pressure washer.

Do not allow the hose to come in contact with the hot muffler.

Equipment must be placed on a firm,supporting surface.

Remove the spark plug or cable from the spark plug to prevent accidental

starting,when not in use, or prior to detaching the high pressure hose.

Keep the pressure washer clean and free of oil, mud and other foreign matter.

Do not wear loose clothing,jewelry,or anything that may be caught in the

engine.

Never direct spray at people or animals.

Never allow children to operate pressure washer at any time.

Use both hands to control the wand.

Do not touch the nozzle or water spray while operating.

Wear safety goggles while operating.

Only approved hoses and nozzles should be used.

The trigger gun must not be jammed in position during operation.

Never tie knots or kink the high pressure hose.

All hose connections must be properly sealed.

Prior to starting the pressure washer in cold weather, be sure ice has not

formed in any part of the equipment.

Use only recommended chemicals.

Outdoor use only.

Place the pressure washer away from cleaning site during operation.

To prevent accidental discharge, the spray gun should be secured by locking

trigger when not in use.

Do not run the pressure washer for more than five minutes without depressing

the trigger or damage to the pump may result.

Check the fuel system periodically for leaks or signs of deterioration such as

chafed or spongy hose

loose or missing clamps,or damaged tank or cap. All

Summary of Contents for CT1709





















Reviews: