![background image](http://html1.mh-extra.com/html/neilsen/ct1709/ct1709_original-instruction_3916666003.webp)
1. SPECIFICATIONS
Rated Power: 13HP/9.6Kw, 4 stroke
Rated Pressure: 22.0 x 10
6
Pa
Allowable Pressure: 25.0 x 10
6
Pa
Rated Flow: 13.0 L/min
No load speed: 3400RPM
Allowable Temperature: 0 - 60
O
C
Warning:Sound power level emitted by this machinery is 113db during normal
operation. please do not use for a longtime and put on the earplug to protect
yourself.
Warning:The vibration of handle and controller about 2.0m/S
2
during normal
operation.Please wear protective goggles,glove and sturdy non-slipping shoes
when operating the machine.
2. IMPORTANT SAFETY INFORMATION
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
1. When using any type of power tool there are steps that should be taken to
make sure that you, as the user, remain safe.
Common sense and a respect for the tool will help reduce the risk of injury.
2.
Read the instruction manual fully.
Do not attempt any operation until you
have read and understood this manual.
Most important you must know how to safely start and stop this machine,
especially in an emergency.
3.
Keep the work area tidy and clean.
Attempting to clear clutter from around
the machine during use will reduce your concentration. Mess on the floor creates
a trip hazard. Any liquid spilt on the floor could result in you slipping.
4.
Find a suitable location
. If the machine is bench mounted; the location
should provide good natural light or artificial lighting as a replacement. Avoid
damp and dust locations as it will have a negative effect on the machine’s
performance.
If the machine is portable; do not expose the tool to rain. In all cases do not
operate power tools near any flammable materials.
5.
Beware of electric shock.
Avoid contact with earthed surfaces; because they
can conduct electricity if there is an electrical fault with the power tool. Always
protect the power cable and route it away from danger.
6.
Keep bystanders away.
Children, onlookers and passers by must be
restricted from entering the work area for their own protection. The barrier must