Always handle the saw blade with care when mounting or removing it.
Do not start the tool when the blade is touching the work piece.
Hold power tools by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a
“
live
”
wire will also make exposed metal parts of the
power tool
“
live
”
and shock the operator.
Always use blades that are designed to be used with this saw. Blades
that do not match the mounting hardware of the saw may be launched
with great force from the saw causing damage to property or personal
injury. A blade that does not match the mounting hardware may also run
eccentrically, causing loss of control.
After changing a blade or making adjustments, make sure that the blade
clamp is holding the blade securely.
Do not use dull or damaged blades.
Do not use the tool on any material containing asbestos.
Avoid cutting nails. Inspect the work piece for any nails and remove
before cutting.
Do not touch the blade or the surface that has been cut with this tool
immediately after use. The surface will be hot and may cause an injury.
3. TECHNICAL DATA
Voltage / frequency
230~240V/50Hz
Rated Power
1050W
No load speed
800-2700/min
Stroke Length
26mm
Variable Speed
Yes
Protection class
II