VARIABLE SPEED CONTROL
Set the reciprocating saw speed by rotating the
variable speed control dial (1) to the appropriate
speed. Position the speed control dial at “1” for
the slowest speed, “3” for medium speed and at
“6” for the highest speed.
Trigger Switch
The trigger switch turns the reciprocating saw ON and
OFF.
1. To turn the saw ON, squeeze the trigger switch (1)
(see figure 4).
2. To turn the saw OFF, release the trigger switch.
LED WORK LIGHT SWITCH
This saw is equipped with a convenient dual LED
work light.
1. To turn the LED work light ON, press the work
light button (1) once (see figure 5).
2. To turn the work light OFF, press the work light
switch a second time.
ADJUSTING THE 8 POSITION REAR PIVOTING HANDLE
The rear pivoting handle can be set at 0°, 45°, 90° , 135° and 180° and -45°,
-90°, and -135° for easy cutting in any direction. The 0° setting is the most
commonly used setting for vertical cutting.
NOTE: Please refer to the illustration figure 6 when adjusting the pivoting
handle.
To rotate the rear pivoting handle:
1. Pull back on the rotating handle release
button (1).
2. While holding the rotating handle release button back, rotate the rear
pivoting handle (2) to the desired position, then release the rear pivoting
handle locking button.