5
tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
6.
Use recommended accessories.
The use of improper accessories could be
hazardous.
7.
Machine cleanliness.
Do not allow the ventilation slots in the machine to
become blocked with dust.
8.
Check the power tool for damage before using the machine.
Any
damaged part should be inspected to ensure that it will operate properly
and perform its intended function. Check for alignment of moving parts,
breakage of parts, mountings, and any other condition that may affect
the machine’s operation. Any damage should be properly repaired or
the part replaced. If in doubt,
DO NOT
use the machine. Consult your
local dealer.
9. Always allow the machine to come to a complete stop before cswitching
from forward to reverse direction and vice-versa.
SERVICE
1.
When necessary, have your power tools serviced or repaired by a
qualified person using identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
6. IMPACT WRENCH SAFETY INSTRUCTIONS
1.
Use the wrench correctly.
Only use the impact wrench in the manner and
for the functions described in these instructions.
2.
Changing Sockets.
Always disconnect the machine from the power
supply when changing sockets etc. Use only Impact Wrench sockets....DO
NOT use standard sockets.
3.
Achieve the correct torque.
Always finish tightening wheel nuts with a
torque wrench or suitable spanner to the wheel-nut torque as
recommended by the vehicle manufacturer.
4.
Avoid excessive use of the wrench.
When tightening a nut or bolt, never
allow the wrench to impact more than 8 times - to avoid over tightening -
3 to 4 impacts is sufficient.
5.
Care of the mains cable.
Keep the mains cable well away from the
machine and ensure an adequate electrical supply is close at hand so
that the operation is not restricted by the length of the cable.
6.
Use outdoor extension leads.
If working outdoors, always use an approved
cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as
that on the machine, or larger. When using a cable reel, always unwind
the cable completely.
Please keep these instructions in a safe place for future reference.
Summary of Contents for CT0079
Page 12: ...11 13 PARTS DIAGRAM...