![background image](http://html1.mh-extra.com/html/neilsen/ct0079/ct0079_original-instruction_3889758005.webp)
4
PERSONAL SAFETY
1.
Stay alert, watch what you are doing and use common sense when you
are operating a power tool.
Do not operate a power tool when you are
tired, ill or under the influence of alcohol, drugs or medication.
2.
Wear personal protective equipment including eye protection.
Safety
equipment such as a dust mask, non-skid shoes or hearing protection used
for appropriate conditions will reduce injuries. Use a face or dust mask if
operation is particularly dusty. Wear ear protectors/defenders as the noise
level of this machine can exceed 85dB (A).
3.
Do not over-reach.
Keep your proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
4.
Avoid accidental starting of the machine.
Ensure the switch is in the off
position and the locking button disengaged before plugging the machine
in to the power supply. Carrying power tools around with your finger on
the trigger or plugging in power tools that are switched on invites
accidents.
5.
Remove any adjusting key or wrench before turning the power tool on.
A
tool left attached to a moving part may result in injury.
6.
Dress properly.
Do not wear loose clothing or jewellery which may get
caught in moving parts. Wear protective hair covering to contain long
hair. For best footing, wear rubber soled footwear. Keep floor clear of oil,
scrap wood, etc.
7 Concentrate on the job in hand, no matter how trivial it may seem. Be
aware that accidents are caused by carelessness due to familiarity.
8. Switch the machine OFF immediately after the task is completed.
5.POWER TOOL USE AND CARE
1.
Do not force the machine.
Use the correct power tool for your application.
It will do a better and safer job at the rate for which it was designed.
2.
Do not use the power tool if the switch does not turn it on and off.
Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
3.
Disconnect the power tool from the power supply before making any
adjustments, changing accessories, or storing the tool
. These measures will
reduce the risk of the power tool starting accidently.
4.
Store power tools out of the reach of children and do not allow persons
unfamiliar with these instructions to operate the power tool
. Power tools
are potentially dangerous in the hands of untrained users.
5.
Maintain power tools in top condition.
Keep tools/ machines clean for the
best and safest performance. Check for misalignment or binding of
moving parts, broken parts, or any condition that may affect the power
Summary of Contents for CT0079
Page 12: ...11 13 PARTS DIAGRAM...