NEFF T74F87N0, Instruction Manual

Page: 30 / 48

30
Warnings
Warnings are displayed if an error occurs within the appliance
which means you can only continue to use the hob with
limitations. Follow the instructions on the display and touch
the Ñ display area to close the warning.
Notes
■
Warnings are displayed with a red line.
■
For some warnings, an error code is displayed (e.g: [error
code 0003])
If necessary, specify the error code when you contact the after-
sales service.
Error messages
Error messages are displayed if errors or malfunctions occur
within the appliance with the result that you cannot continue to
use the hob.
Disconnect the appliance from the power supply. Wait a few
seconds and reconnect it. If the display appears again, call the
after-sales service.
Notes
■
Warnings are displayed with a red line.
■
For some error messages, an error code is displayed (e.g:
error code 0003)
If necessary, specify the error code when you contact the after-
sales service.
Tips
3FTUSJDUFEGVODUJPOT
:PVDBODPPLVTJOHSFTUSJDUFEGVODUJPOT
*GUIFQSPCMFNQFSTJTUTTXJUDIUIFBQQMJBODFPGG
BOEPOBHBJOBUUIFIPVTFIPMEGVTFPSDJSDVJUCSFBLFS
JOUIFGVTFCPY$BMMUIF$VTUPNFS4FSWJDFPGZPVS
DPVOUSZBTTPPOBTUIJTJOGPSNBUJPOBQQFBSTBHBJO
$POUBDUEBUBVOEFSXXXOFGGJOUFSOBUJPOBMDPN
4ZTUFNFSSPS
4XJUDIPGGUIFBQQMJBODFBUUIFIPVTFIPMEGVTF
PSDJSDVJUCSFBLFSJOUIFGVTFCPY8BJUBGFX
TFDPOETBOEUIFOTXJUDIJUCBDLPO$BMMUIF
$VTUPNFS4FSWJDFPGZPVSDPVOUSZBTTPPOBT
UIJTJOGPSNBUJPOBQQFBSTBHBJO$POUBDUEBUB
VOEFSXXXOFGGJOUFSOBUJPOBMDPN
Problem Remedy
The size or shape of the cookware is not displayed correctly
on the Touch display.
Differences in how the cookware is shown on the display are normal
and do not adversely affect the correct operation of the hob (particu-
larly small cookware is shown as a round hotplate).
Two hotplates that are quite close to each other may be displayed
as one hotplate. Redistribute the cookware.
Never place the cookware outside of the usable cooking surface.
The hotplate power level cannot be increased. The overall output of the hob has been limited. Adjust the overall
output under “
Power management
” in the Options menu.
Very large cookware may affect the maximum power level of other
hotplates on the same half of the hob. Redistribute the cookware.
The powerBoost function has been deactivated or cannot be
activated.
You can only activate the powerBoost function once on the right and
left-hand halves of the hob. If a second hotplate is switched on or is
already in operation, the powerBoost function will not be available or
is deactivated and the hotplate returns to power level
9.0
.
The overall output of the hob has been limited. Adapt the overall out-
put under “
Power management
” in the Options menu.
An audible signal sounds if there is an object on the touch
display.
Remove the object and acknowledge the indicator on the display.
You can now reset the hob.
The cookware is not detected. The cookware is outside the appropriate size. Sizes with a diameter
of 90 to 340 mm are suitable.
There may be liquid under the cookware. Ensure that the base of the
cookware is dry.
The cookware may not be suitable for induction cooking.
The hob switches off automatically If no hotplate is in operation on the hob and you do not change the
settings for a prolonged period of time, the hob will automatically
switch off.
The hotplate cannot be adjusted. Only 2 hotplates can be in operation on each side of the hob.
An item of cookware in the centre of the hob occupies one hotplate
on each side of the hob. You can only set one other hotplate for
each side of the hob.
The cookware may not be suitable for induction cooking.
The hotplate settings are not transferred when the cookware
is moved.
Move the cooking container more slowly over the hob or use the
transfer function.