00
W
W
W
W
Changing the
Notes
Other functions
When the duration
has elapsed
When the duration has elapsed, the burner switches
off, a signal sounds for 30 seconds,
is shown on
the right of the display and on the left
the dots will
rotate.
Touch any symbol. The display goes out and the
audible signal ceases.
TURN THE CONTROL KNOB TO THE "0" POSITION
FOR THE BURNERS WHICH HAVE BEEN
SWITCHED OFF BY THE TIMER.
duration
Touch the symbol , select the burner and change
The new time begins to count down after a few seconds.
Cancelling
prematurely
Touch the symbol , select the burner and change
disappears after a few seconds or if another timer is
set, the timer with the shortest time is displayed.
The timer function is no longer active after a power cut.
You can set duration up to 99 minutes.
If you would like to call up the remaining duration of the
W
set times, touching the symbol you will see them.
Touch during al least 4 seconds the symbol . A beep
sounds and the display shows the following message
PL
.
Then, the display will show the information about the
Panel Lock
set times. If the Panel Lock is activated and any
symbol is touched, a beep sounds and the message
PL
is displayed. In order to deactivate the Panel Lock,
touch the symbol once more during at least 4
seconds.
11
-
+
the time using the symbol - or + whithin next 5 seconds.
the time to
00
using the symbol - or +. The indicator