en
Cleaning and servicing
12
1.
Observe the information regarding the cleaning
agents.
2.
Place the grease filters loosely into the dishwasher.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from customer service
or the online shop.
3.
Start the dishwasher.
Select a temperature of no more than 70 °C.
4.
Allow the grease filters to drain.
10.7 Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
▶
Grip below the grease filter with one hand.
1.
Fit the grease filters.
2.
Fold the grease filters upwards and engage the
locks.
3.
Make sure that the locks engage.
4.
Close the filter cover.
5.
Make sure that the filter cover locks engage cor-
rectly.
10.8 Odour filter for recirculating air mode
You can obtain odour filters from the after-sales service
or the online shop. Only use original odour filters.
Replacing the odour filter
Requirement:
The grease filters have been removed.
1.
Open the odour filter cartridge.
2.
Remove the odour filter.
3.
Remove the new odour filter from the packaging.
4.
Insert the odour filter.
Insert the odour filter in the correct direction.
5.
Close the odour filter cartridge.
6.
"Fitting grease filters", Page 12
10.9 Replacing the batteries in the remote
control
WARNING ‒ Risk of injury!
Children may swallow batteries.
▶
Keep batteries out of the reach of children.
▶
Keep an eye on any children when you are repla-
cing batteries.
Batteries may explode.
▶
Do not charge the batteries.
▶
Do not short-circuit the batteries.
▶
Do not throw batteries into a fire.
ATTENTION!
Improper handling of batteries.
▶
Do not short-circuit the terminals.
▶
Only use the specified type of batteries.
▶
Do not use different battery types together.
▶
Do not use new and used batteries together.
▶
Do not use rechargeable batteries.
Leaking batteries may damage the remote control.
▶
Remove the batteries if you are not using the re-
mote control.
▶
Safely dispose of empty or defective batteries in an
environmentally friendly manner.
1.
Remove the cover.
2.
Remove the empty batteries.
3.
Insert the new batteries (3 V CR 2032).
4.
Close the cover.
5.
Dispose of the empty batteries in an environmentally
friendly manner.