NEFF C54L60W3, Instruction Manual

Page: 25 / 68

25
3.
Set the cooking time using the rotary selector.
(e.g. ‚ : „‹ hours).
The setting is applied automatically
4.
Press the
…
button.
The set cooking time counts down.
The cooking time has elapsed
A signal sounds. The appliance stops heating. The display
shows 0:00. You can cancel the audible signal before it has
finished by pressing the ÁÀ button.
Changing the cooking time
Change the cooking time using the rotary selector.
Cancelling the cooking time
Using the rotary selector, turn the cooking time back to 0:00.
The change is applied after a few seconds. The cooking time
has been cancelled.
Checking time settings
If several time-setting options have been set, the corresponding
symbols appear in the display. The KJ symbol is in the
foreground in front of the time function symbol.
To check the kitchen timer
V , cooking time x or clock
time
0
, press the
ÁÀ
button repeatedly until the
KJ
symbol
is in front of the appropriate time function. The relevant value
will appear for a few seconds in the clock display.
Setting the clock
You can only change the clock when no other clock function is
active.
1.
Press the clock function
KJ
button repeatedly until the
KJ
and
3
symbols light up.
2.
Turn the rotary selector to set the time of day.
3.
Press the
KJ
clock function button.
Your setting is applied.
Changing the clock
e.g. from British Summer Time to Greenwich Mean Time.
Make the settings as described in steps 1 and 2.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Press the main switch. The appliance is ready for operation and
the
~
symbol lights up.
1.
Press and hold the
o
button for a few seconds.
The first basic setting appears on the clock display.
2.
Press the o button repeatedly until the required basic setting
is shown.
3.
Make the desired setting using the programme selector.
4.
Finally, press and hold the
o
button for a few seconds.
All settings are applied.
You can change the settings at any time.
Basic setting Options Explanation
™‚
Audible signal duration:
‚
= short = 10 seconds
Audible signal duration:
ƒ
= medium = 2 minutes
„ = long = 5 minutes
Signal after the cooking time has elapsed
™ƒ
Button tone:
‚
= on
Button tone:
ƒ
= off
Confirmation tone when a button is pressed