Page 8 of 15
Front USB Configuration
The USB port is used exclusively for configuring the TanGo from the Neets
Project Designer software. It can’t be used to control any external devices.
The host USB port can power the control system while configuring, so no
external power is needed when configuring the TanGo. However, external pow-
er and the USB port may be connected at the same time, for example when
changing the configuration on an already installed unit.
The USB connector for connecting to the controller is “mini USB B 5P”. You
can buy this cable on the web (select a USB A to Mini USB B 5P).
RS-232 Status Indication
The RS-232 status LED displays the current status of the RS-232 ports.
The LEDs illuminate when there is active communication on the port.
IO Status Indication
The IO status LED displays current status of the I/Os.
When an IO is configured as input, the yellow LED marked “in” will
illuminate when the input is high and turn off when the input is low.
The green LED marked “out” will remain off.
When an IO is configured as output, the green LED marked “out” will
illuminate when the output is high and turn off when the output is low.
The yellow LED marked “in” will remain off.
Connection and Controls
Front
Number:
Description
1
USB configuration input
2
RS-232 status indication
3
IO status indication
4
Relay control button
5
Relay status indication
6
PoE output status indication
7
IR learner input
8
Power and error indication
1
3
4 5
2
6 7 8
310-0305-002-004 REV1 (Silkscreen Top plate)
designed in Denmark
Neets Control - TanGo
on
control
config
2
1
tx
rx
4
3
5
in / out
1 2 3 4
in
out
5 6 7 8
relay
on
ir
1
2
3
4
poe
310-0305-002-004 REV1 (Silkscreen Top plate)
designed in Denmark
Neets Control - TanGo
on
control
config
2
1
tx
rx
4
3
5
in / out
1 2 3 4
in
out
5 6 7 8
relay
on
ir
1
2
3
4
poe
310-0305-002-004 REV1 (Silkscreen Top plate)
designed in Denmark
Neets Control - TanGo
on
control
config
2
1
tx
rx
4
3
5
in / out
1 2 3 4
in
out
5 6 7 8
relay
on
ir
1
2
3
4
poe
310-0305-002-004 REV1 (Silkscreen Top plate)
designed in Denmark
Neets Control - TanGo
on
control
config
2
1
tx
rx
4
3
5
in / out
1 2 3 4
in
out
5 6 7 8
relay
on
ir
1
2
3
4
poe
