Page 7 of 15
Installation
The Neets Control – TanGo is designed to be easily installed in any convenient location. The unit can be
placed on a desk free standing. Simply unpack the unit, mount the adhesive feet and it is ready to go.
Alternatively, the unit can be mounted under a table or on a ceiling with the included self-tapping
screws. Unpack the unit, place the unit on the surface where it is to be mounted, and screw the
two screws through the holes in the top as shown below:
The unit also can be mounted in a 19 inch standard rack using the Neets Rack Shelf (Part number:
306-0017). See separate manual for installation instructions.
310-0305-002-004 REV1 (Silkscreen Top plate)
designed in Denmark
Neets Control - TanGo
on
control
config
2
1
tx
rx
4
3
5
in / out
1 2 3 4
in
out
5 6 7 8
relay
on
ir
1
2
3
4
poe
