•
Šaldova 12
•
Prague 8
•
168 00
•
Czech Republic
•
Europe
DESCRIPTION OF FUNCTION AND CONFIGURATION
The information provided below applies if you have a full version of the Trexee service. The functions listed below cannot be used with the Lite version.
The modules operate in a mode selected by you. Module settings are selected at
in the
Settings
–
Unit settings
tab. Each module and the relevant
details can be edited by clicking on the
“pencil” icon
(registration number, vehicle name, default driver, vehicle icon, travel type).
The “plus” button
is used to add
new modules to the system. To add a new module, you need to know the HW key of the module, which is found on the label on the rear side of the module, or you can
contact your sales representative to obtain your HW key.
•
“Unit configuration” tab
•
Here, you can change the unit name, icon for the relevant unit and unit registration number or select a driver.
•
To complete your changes,
click “Save”.
✓
•
“Profile setting” tab (this item is accessible depending on the unit type and setting
)
•
Here, you configure parameters for sending values.
•
You always need to fill in all fields
–
the current values are listed in the
Current profile
field in the left bottom section of the screen.
•
•
These values can be changed once after 24 hours from the last change.
•
The default screen offers 4 choices to ensure that you do not need to input all required settings manually.
•
To make configuration easier for you, we have prepared 4 options for module setting to choose from.
•
You only need to select the option that matche
s your needs and you don’t need to go through any additional settings.
