•
Šaldova 12
•
Prague 8
•
168 00
•
Czech Republic
•
Europe
You can display explanations for individual fields by clicking the question mark. We always
RECOMMEND
reading the help section before saving your
settings to find out what each of the fields represents and what you have set.
You can change the settings
once after 24 hours
from the last change.
What analogue values mean
–
see below
•
If you need to set your unit to trigger the alarm when the unit is removed from the surface (available with Maxi and Standard modules) or you need
to close trips immediately after the end of each trip, please go to the expert settings.
✓
o
LOCK
–
Locking the unit position for detecting its removal and triggering alarm
. (Only activate this if you are familiar with this function and
know how to use it.) This function cannot be used with the Mini module.
o
RIDES
–
This function defines precise beginning and end of individual trips
. (Only activate this if you are familiar with this function. This
cannot be combined with certain profile types.)
▪
Always select RIDES when you want to add fuelling to the system.
o
Current profile
–
setting the tracking interval and value monitoring via SMS. Set the units according to the example provided above.
▪
Interval for sending positions in motion
▪
Interval for sending positions when stationary
▪
First position in the interval for analogue value recording
•
After you have selected all values, click “Send”
•
The system will not let you continue if you forget to set any value or set an incorrect value.
•
“Fuel” tab
•
This is only estimated information in the case of wireless modules.
