background image

 

 

 

Šaldova 12 

 Prague 8 

 168 00 

 Czech Republic 

 Europe

 

OPERATION AND INSTALLATION

 

PUTTING INTO OPERATION

 

The modules are supplied with configuration for sending the position once every 24 hours and once every 3 minutes when in motion. For more information see Function 
description.  

SHUT DOWN AND STORAGE

 

Store the modules in a charged status. Charge the accumulators to at least 50% of their capacity at least every six months. Check the battery status in S series modules every 
5 to 6 weeks. Storing the modules in a discharged status may cause irreparable damage to the accumulators due to self-discharge. 

CHARGING

 

The modules are charged via a micro USB connector located under a rubber cover on the front side. The charging status indicated by LED next to the USB connector. Charge 
the modules with the charger and cable supplied as accessories. Charging the modules with anything other than original accessories may significantly lengthen the charging 
time. 

INSTALLATION OF L SERIES MODULE IN HOLDER

 

CAUTION, the product contains very strong magnets! Place the product on a metal surface or in a holder very carefully to prevent injuring fingers! 

Always dismantle the product exclusively with the tool designed for this purpose 

 the MD 092 001 pry bar. L series modules can be lifted from the metal surface using the 

pry bar in the place of locks on the short side of the box. 

If an L series module is placed in the MD 092 000 holder, insert the pry bar in one of the openings on the long side of the holder and lift it with the pry bar. 

RECOMMENDED INSTALLATION 

 attach the MD 092 000 holder to the item with at least 4 screws. Use the openings provided on the holder. The holder can also be attached 

to the item with a premium quality double-sided tape 

 we recommend 3M tapes. 

PLACEMENT

 

If possible, place the modules with the front side (with a rubber cover of the USB connector or the USB connector plug) facing free space towards the sky to ensure good 
reception of the GPS signal for the GPS antenna inside the module. Positioning modules without free space towards the sky will prolong the time required for obtaining the 
valid position and thus shortening the operating time per accumulator charging. 

GPS SYSTEM

 

The system operates with precision of up to 2 m in free space. The precision in built-up areas is lower and the time required for obtaining the position is longer. GPS signal 
cannot be received inside buildings or underground spaces. Signal reception may also deteriorate with unsuitable placement. The quality of the signal changes during the 
day due to satellite movement and may be affected by adverse weather conditions (heavy rain, snowfall). The signal may also be shadowed by metal items near modules. 

SIM INSTALLATION

 

All modules are supplied by the manufacturer with a SIM card. Removing a SIM card is deemed a breach of warranty. The modules will not function with other SIM cards 
than those provided by the manufacturer. A removed SIM card will not function is any other equipment. 

 
 

Summary of Contents for NUTS S Series










Reviews: