60
EN Operating Instructions
The COMMANDER 2 HVA2N requires 3 rechargeable
batteries/batteries size AA 1.5V to run.
1. Lever the clip of the battery compartment flip to the
outside, unlock and open battery compartment.
2. Pull on the battery tape to undo and remove
2 rechargeable batteries/batteries 3. Undo
rechargeable battery/battery by hand and also remove.
3. Insert rechargeable batteries/batteries; ensure that the
battery tape is posited back under the top 2
rechargeable batteries/batteries. Note polarity.
4. To close the cover, press down on it until it audibly latches
into position with a click.
Check that the battery tape is not positioned between the battery
compartment flap and the seal, as otherwise the housing tightness is no
longer ensured.
14 Insert/replace rechargeable batteries/batteries
COMMANDER 2 HVA2N
14.1 Insert /replace rechargeable batteries/batteries
15 Maintenance/Care
15.1 Maintenance
The PRIMUS 2 HVA2N and the COMMANDER 2 HVA2N are maintenance
free units. If the PRIMUS 2 HVA2N or the COMMANDER 2 HVA2N no longer
function due to an internal error (error messages Err9-Err11) or damage, send
them for repair to:
NEDO GmbH & Co. KG
Service-Abteilung
Hochgerichtstraße 39 – 43
72280 Dornstetten / Germany
15.2 Care
The laser diode of the rotating laser is protected by glass covers. Use a soft
cloth to regularly clean the glass covers and ensure correct operation. Avoid
scratches in the glass covers. Dirt on the laser reception field of the COM-
MANDER 2 HVA2N affects the reception quality and range of the laser recei-
ver.Use standard cleaning agents to clean the dustproof and watertight, partly
rubberised housing. Use plenty of water to remove heavy soiling.
Do not immerse PRIMUS 2 HVA2N and COMMANDER 2 HVA2N in
water.
CAUTION!
CAUTION!