43
EN Operating Instructions
7.2 MANUAL operating mode
In MANUAL operating mode the laser does
not
detect any vibrations and
does not level itself horizontally.
HVA2N
HVA2N
AUTOMATIC opera-
ting mode is active
Set MANUAL opera-
ting mode
The hand symbol is
displayed
NOTE
Use the
button to switch to MANUAL operating mode immediately after switching
on
.
MANUAL operating mode is active. The following functions can be invoked:
Use the
button to invoke the VARIABLE SPEED function (Chapter 8.1).
Use the
button to invoke the SCANNING function (Chapter 8.2).
Use the
button to invoke the TILT/TURN X and Y axes function
(Chapter 8.3).
Use the
button to switch to AUTOMATIC operating mode (Chapter 7.1).
Use the
button to exit the operating mode, switch off the laser.
8 Function PRIMUS 2 HVA2N
8.1 Set VARIABLE SPEED
The default speed is 600 rpm and is designed for use of the laser receiver of
COMMANDER 2 HVA2N. The speed can be gradually changed by pressing
the
button several times to make the laser beam more perceptible to the
human eye.
HVA2N
HVA2N
60
rpm
60
rpm
10
rpm
300
rpm
600
rpm
300
rpm
AUTOMATIC opera-
ting mode display
MANUAL operating
mode display
Sequence of the speed steps
