4
a
Quick start guide
Bluetooth Headphones
FSHP150GY
For more information see the extended
manual online:
ned.is/fshp150gy
Intended use
The Nedis FSHP150GY are Bluetooth headphones which will
make you enjoy music at anytime and anywhere. It connects with
different kinds of audio systems, such as your tablet PCs, mobile
phones, digital music players and other wide range of audio-visual
products.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Parts list [Image A]
1
Next song / Volume up
2
Power / play / pause
3
Previous song / Volume
down
4
Status indicator LED
5
Microphone
6
Audio port (3.5mm)
7
Micro USB port
Safety instructions
-
WARNING
• Only use the product as described in this manual.
• Do not expose the product to water or moisture.
• Please turn off the headphones and put it into the original box
to avoid damage, scratches or bracket deformation, when not
used for a long time. In order to prolong the battery service life,
please charge every 6 months.
• Please first charge the headphones when unused for a long
time.
• The battery of the headphones is original, do not change by
yourself.
• Keep the headphones in a dry place.
• Operating temperature is 5
o
C to 35
o
C. Do not expose to much
higher temperatures, to avoid a battery blast accident.
• Do not bent or twist the bracket to avoid deformation.
• Do not let the ear-cap be teared down by an unprofessional
person.
• Listening on high volume for a long time will damage your
hearing.
• Audiologists advise not listening on a high volume. If tinnitus
occurs, turn the volume down or stop playing. Avoid a sudden
increase in volume.
• Do not use the headphones in a (dangerous) place where you
cannot hear the surrounding sounds.
Charging the headphones
• Connect the USB cable to
7
.
4
4
lights up red when charging.
4
4
turns blue when fully charged.
Switching on the headphones
• Press and hold
2
for 3 seconds.
4
If the headphones are not paired within 5 minutes, they switch
off.
Pairing the headphones to a Bluetooth audio
source
1. Switch on the headphones.
4
4
blinks red and blue to indicate pairing mode is active.
2. Enable Bluetooth on the device you want to pair the
headphones with.
3. Select "FSHP150" from the list of available Bluetooth devices on
your device.
4
When paired,
4
lights up blue.
4
If the headphones have been paired with another device before,
make sure that device is switched off.
4
If the headphones lose connection to the Bluetooth source,
they will automatically reconnect when back in range and
switched on.
Controlling the volume
1. Press and hold
1
to increase the volume.
2. Press and hold
3
to decrease the volume.
4
When the volume reaches to maximum, there is a warning tone.
Controlling the music
1. Press
2
to play or pause the music
2. Press
1
to skip to the next song.
3. Press
3
to go back to the start of the song. Press again to go to
the previous song.
Making phone calls
1. To answer an incoming call, press
2
.
2. To reject an incoming call, press and hold
2
for 2 seconds.
3. To end a call, press
2
.
4. To quickly redial the last called number, double press
2
.
Switching off the headphones
Press and hold
2
for 3 seconds to switch off the headphones.
Specifications
Product
Bluetooth Headphones
Headphone Type
On-ear headphones
Article number
FSHP150GY
Frequency range
2402 - 2480 MHz
Bluetooth® version
5.0
Maximum transmission
power
4 dBm
Battery capacity
3.7 / 250 mAh built-in Lithium
battery
Charging input power
5V / 500mA
Maximum Charging time
Up to 2 hours
