Necta Canto Plus Espresso, Installation Operation & Maintenance

Page: 31 / 72

© by N&W GLOBAL VENDING S.p.A.
25
10 2009 3325 - 00
The machine code, the date and the software release
will be also printed.
To print, act as follows:
-from the print function press key
�
to display “Do you
confirm?”;
- connect the printer;
- press the Enter key
�
to start printing
d
isplay
The function is intended to sequence-display the same
data you can obtain by printing statistics.
Press the Enter key
�
to sequence-display the following
data:
total counters
1 - counter by selection;
2 - counter for bands,
3 - discount counter:
4 - failure counter;
5 - coin mechanism data
relative counters
1 - counter by selection;
2 - counter for bands,
3 - discount counter:
4 - failure counter;
5 - coin mechanism data
d
eleTe
Statistics can be reset for relative counters either glo-
bally (all types of data) or selectively for:
- selections
- discounts
- failures
- coin mechanism data
Press the Enter key
�
to display the blinking message:
“Do you confirm?”
Press the Enter key
�
to reset the statistics. The display
will show the “Running” message during the operation to
reset the statistics.
INDIVIDUAL PRICE
The machine can manage up to 4 different prices per
selection, which can be active according to the time
band you have set (standard or promotional) and/or the
payment system in use.
Use this function to vary the sales price for every single
selection by selecting among the price ranges available.
MANAGEMENT OF CHANGE TUBES
This function is active only if the payment system
you have set up can perform this operation.
Access the function to load or empty the change tubes
manually.
If you confirm load, “Credit : ——” will appear on the
display. This is the value of the money made available
in the tubes for the change. If you insert a coin into the
validator, the display will increase the value of the money
made available in the tubes for the change.
If you confirm unload, you can establish the tube on
which you wish to act. Whenever you press the Enter key
�
, a coin is ejected by the active tube.
TEMPERATURE DISPLAY
Use this function to read the coffee and instant boiler
temperatures directly expressed in °C.
TEST DISPENSING
Every single button (or combination of keys according to
the models) will operate the relative selection for com -
plete or partial test dispensing (see the selection dose
table).
Please Note: For espresso coffee based selections,
only additions are dispensed with partial powder
and water deliveries. If no addition is provided for
by the selection, the display will show “Disabled
Sel. “
Possible test dispensing cycles are listed here below::
-Complete dispensing cycle
-Water-only dispensing cycle
-Powder-only dispensing cycle
-No-accessory dispensing cycle (no cup, stirrer and
sugar)
-Accessory-only dispensing cycle (only cup, stirrer and
sugar)
GSM PREALARMS
This function is active only if the vending machine
is properly set up and connected with a GSM data
transmission device.
The control software can send an “ending product”
signal via GSM modem when a well-defined (program -
mable) number of pieces or powder grams of a given
product is lacking.
Use this function to reset the counters intended to man-
age prealarms.
EVADTS TRANSFER
If you activate this function, the machine will be waiting
for connection with a device for the purpose of acquiring
EVADTS statistics.