© by N&W GLOBAL VENDING S.p.A.
48
10 2009 3325 - 00
CUP DISPENSER
The cup dispenser is conceived in such a way that it can
be easily disassembled for maintenance operations.
It is possible to disassemble every single column of the
cup stacker and the cup release ring without making use
of any tool.
The cup release ring shall not be opened for normal
cleaning.
If you are required to act, please follow the instructions
here below at the time of reassembly:
-align the notch on the toothwheel microswitch activator
gear with the scroll support arrow.
- observe the orientation of scrolls as it is represented by
the figure.
PRODUCT CONTAINERS
- Remove the containers from the machine;
-Disassemble the product outlet ports and extract the
Augers from the rear side of the container;
-Clean all the parts by using a solution of hot water and
sanitising products and dry them carefully.
Fig. 35
1- 2 l container base
2- Gear wheels
3- Pins for wheel
4- 2 l container
5- Beater spring
6- Container covers
7- 4 l container
8- Auger
9- Powder outlet port
Fig. 34
1- Cup stacker
2- Extractable column
3- Cup release scrolls
4- Toothwheel microswitch activator
5- Reference notch
Summary of Contents for Canto Plus Espresso
